NextArticles.com » Arts-and-entertainment » Photography » Photoshop Software...Quick and Easy techniques for Photoshop

---

Photoshop Software...Quick and Easy techniques for Photoshop

Author: DavidPeters Total views: 4 Word Count: 1652

A fun idea to do is create an abstract picture, you can do anything you want to it. One fun idea is the add a fire look to a picture, here is a step by step way to do it: First thing's first, get a nice stock photo. I used a stock photo of an eye from deviant ART.First of all I opened the photo and resized it to 75% of it's original size. 1. After you've opened your photo up, duplicate the background layer then apply Filter > Distort > Twirl and use the default setting. That should have just distorted it slightly. Now change the layer mode for your duplicated layer to Lighten. That will have made the eye look a little bit alien-like. 2. Now brighten up the picture a little bit by adding in a Brightness/Contrast adjustment layer (Layer > New Adjustment Layer > Brightness/Contrast...) Now this is the part where you choose the fiery color for your photo. Go to Layer > New Adjustment Layer > Gradient Map. I changed the layer mode for this layer to Linear Light and lowered the opacity to 85%. 3.Ok, here are some nice optional effects.Before adding effects like these, you'll probably need to flatten your image (Layer > Flatten Image) then duplicate the one remaining layer. First, I applied Filter > Artistic > Rough Pastels with the default settings. Now change the layer mode for this layer to Lighten and maybe lower the opacity if you see it need sit. I lowered the opacity to 70%. 4. To finish this tutorial off, I flattened all the layers, applied Filter > Sharpen > Sharpen, faded the sharpen to about 40% (Edit > Fade) then I added in a little bit of tech and grunge.

A useful tool in photoshop basics is how to clone. Cloning can be important when you want to know how to take something off of one picture and putting it onto another. When you are cloning you can do anything you want to. You can put someone in a different place, create a "clone of them" Anything you do is quite simple, here is a step by step tutorial on how to do it. 1.Click CLONE TOOL in toolbar 2.Click right click and set HARDNESS to 40. 3.Click what you want clone and hold. Hold mouse and press ALT. 4.Hold and move mouse where you want clone.

Using photoshop you can create some pretty awesome effects with pictures alone. Here is a step by step guide to show you how to blend and create a smooth waterfall. With your image open in Photoshop, grab your Lasso tool from the Tools palette: Select the Lasso tool from the Tools palette.You can also press the letter L on your keyboard to quickly select it.Then, with the Lasso tool selected, drag a selection around your waterfall. It doesn't have to be surgically precise, but try not to stray too far from the edges of the waterfall: Use the Lasso tool to drag a selection around the waterfall.If you need help with making selections, check out our tutorial Unlock The Full Power Of Basic Selections. Copy the Selection Onto Its Own Layer. With the waterfall selected, use the keyboard shortcut Ctrl+J (Windows) / Command+J (Mac) to copy it onto its own layer above the Background layer. You won't see anything happen in the Document Window, but if you look in the Layers palette, you'll see the waterfall on a new layer: Press "Ctrl+J" (Windows) / "Command+J" (Mac) to copy the waterfall onto a new layer.Step 3: Apply The Motion Blur Filter To The New Layer With our waterfall now copied to its own layer, we can create our "silky smooth" effect by applying the "Motion Blur" filter to it. To do that, go up to the Filter menu at the top of the screen, select Blur, and then select Motion Blur. This brings up the Motion Blur dialog box:mPhotoshop's "Motion Blur" dialog box. Adjust the Angle of the blur so it matches the angle at which the water is falling. In most cases, this would be 90, since water would normally fall straight down. In my case, since the water is rushing so quickly over the edge, it's actually falling at a bit of an angle, so I've set my blur angle to -77. The easiest way to match your blur angle to the water is to click inside the Angle value box and then increase or decrease the value one degree at a time using the up or down arrow keys on your keyboard, which is what I've done. Once you've set the correct angle, drag the Distance slider at the bottom until your waterfall looks nice and silky. I've dragged mine to a value of 73 pixels, which gives me a nice effect. The image after applying Motion Blur.

When you are doing photo effects you can create those images that sometimes ipods use, the first thing you should do is de-saturate the photo. Change the levels so the range is closer. (Basically slide the black and white sliders towards the gray slider.) Create a new layer. Fill it with #fb4700. Set blending mode to Hard Light. For the Person Duplicate the photo. Take out the background by either the selection tool. Create a new layer. On that new layer, take the character, and paint the person black where you want it black.Set the person layer to blending mode overlay. This will have the part that is not black come through to reflect that red and orange colors. For the Graffiti create new layer just below the layer with the solid color set to hard light. Take a black grunge brush and start grunging the layer. Then again add grunge with the color set to white. Take the eraser tool and take a grunge brush. You can then delete some of the grunge on the layer. Create new layer above all. Set the foreground color to #e6ff8e. Grunge this layer a little. Use it for accents.

While texturing you can add cool looking scan lines to your picture. This is easy enough: Open Photoshop and click on File > New and set the width to 1 pixel, the height to 3 pixels and set the "Contents" section to "Transparent" for this tutorial. You will have to click on View > Zoom In a few times so you can see the palette.Now, right click on the "Brush Tool" and select the "Pencil Tool" and at the top of the screen set your "Brush " to 1px, your "Mode" to normal and your "Opacity" to 100 percent. Take your "Pencil Tool" and click in the center of your new palette so the top and bottom third are still transparent. Go to Edit > Define Pattern and save your new image as a scan line pattern like the example below. Next, open any photo you want to add scan lines to. Click on the "Rectangular Marquee Tool" and drag it over the photo. Now right click on the photo and click on "Fill" and set your properties to the image below. The "Custom Pattern" will be the one you just created. You can set your "Blending" options to what appears best for your photo.

A fun thing to do with patterns is to create rain. Learning how to add rain to any image is quite easy. Start by opening the image you would like to add the effect of rain to. Then create a new layer and fill it with white colour. Now go to Filter-> Noise -> Add noise. Then apply motion blur with the angle you would like to have your rain falling and change the blending option to screen. Now press ctrl + M and change the curve from the middle acc. to the intensity of the rain.

Images on layouts are just as important as the layout itself. A fun one to would be the Alert Icon: Project09 tutorials photoshop Alert Icon Step 1 Create a new layer, and select the polygonal lasso tool. Draw a triangle as shown on the left. When you have the selection, smooth it by 6. Step 2 Set the foreground color to #FFEB90 and the background to #FF7131. Select the gradient tool, then choose the radious mode. Click and drag from the top to bottom inside the selection, using the gradient tool. You should see something similar to mine on the left. Step 3 Open up the layer styles box for layer 1. Add an inner shadow with these settings... Blend Mode: Overlay Color: Black Angle: -90 Distance: 2 size: 1 Leave the rest of the settings as default. Step 4 Add an outer glow with these settings... blend mode: normal opacity: 33% size: 9px Spread: 0 Add an exclamation mark using the text tool. Set the color to black, the to size to 48, and set the font to Times New Roman. That will give us a nice thick character. Open the layer styles box for the text layer and add outer glow with these settings... Blend mode: normal opacity: 13% spread: 25 size: 8 Step 5 Create a new layer. Select the rectangular marquee tool and set it to subtract. Cut the previous selection in half, leaving the top half. Contract the selection by 2 then smooth it by 4. Fill it with (white) and set the opacity of the layer to 54%. Step 6 De select the selection by pressing ctrl+d. Create a new layer. Hold down your ctrl button and click the first layer we made, in the layer palette. This should create a selection around our triangle. Make sure your still on the top layer, which we just created. Set the foreground color to black and stroke the selection, this will create our border. Congratulations! Your finished!

Download Hundreds of Complimentary Industry Resources
Get hundreds of popular Industry magazines, white papers, webinars, podcasts, and more; all available at no cost to you. With more than 600 complimentary offers, you'll find plenty of titles to suit your professional interests and needs. Click Here and Sign up today!

Sponsors

About the Author

Did you enjoy this article? Fascinated about Understanding Photoshop Fast? Well now you can by getting this Free Report...what are you waiting for?

---

Rating: Not yet rated

--Choose-- 0 1 2 3 4 5

Comments No comments posted.

Add Comment

You do not have permission to comment. If you log in, you may be able to comment.

More articles in this Category

1: High Fashion Wedding Photography
2: Advice on Composing a Photograph
3: A Look at the Best Buy Digital Cameras
4: The Genuine Marine Digital Camera
5: Photoshop Tutorials